CADDX NX-6 Manual de Instalação descarregar pdf (Página 61)

GE Security

LOCATION 60 - SENSOR LOW BATTERY COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8

segments, numerical data)

Location 60 contains the event code for a zone “Sensor Low Battery” for a 4+2 and 3+1

format. For a 4+2 format, the digit programmed in this location will be sent as the tens

digit. As ones digit, the zone number (1-F) will be reported (e.g. zone 16 = 1, zone 10 =

A).

Any segment left as “0” will follow the segment 1 selection.

Segments 1-2 contain the sensor low battery code per bank of 15 zones.

Segments 3-8 are reserved.

To report a restore, the restore code of location 56 will be used.

Segment 1

Zones 1-15, “Sensor Low battery Code”

Segment 2

Zone 16 “Sensor Low Battery Code”

Segment 3-8

Reserved

LOCATION 61 - SENSOR MISSING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8

segments, numerical data)

Location 61 contains the event code for a zone “Sensor-missing” for a 4+2 and 3+1

format. For a 4+2 format, the digit programmed in this location will be sent as the tens

digit. As ones digit, the zone number (1-F) will be reported (e.g. zone 16 = 1, zone 10 =

A).

Any segment left as “0” will follow the segment 1 selection.

Segments 1-2 contain the sensor missing code per bank of 15 zones.

Segments 3-8 are reserved.

To report a restore, the restore code of location 56 will be used.

Segment 1

Zones 1-15, “Sensor Missing Code”

Segment 2

Zone 16 “Sensor Missing Code”

Segment 3-8

Reserved

LOCATION 62 - DURESS COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments,

numerical data)

Location 62 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the Duress code is enabled in location 44. Segment 1 contains the tens digit, and

segment 2 contains the ones digit.

For a 3+1 format, only the segment 1 digit (tens) will be sent.

NX-6-EUR Installation manual Page 61 23/12/04

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 103 104

Sem comentários

CADDX NX-6 Manual de Instalação Página 61