CADDX NX-6 Manual de Instalação descarregar pdf (Página 51)

GE Security

Segment 5

1 = On: enable lost clock service light

2 =

On: enables Zone Doubling (requires NX-200 Zone Doubling Kit).

3 = On: disables on-board zones

4 = On: will allow two trips on same cross-zone to activate an alarm

5 = On: will not allow zones that are force armed to report bypass

6 = On: enables silent exit option

7 =

On: activate “first disarm reporting” - “last arm reporting” for

partitions

8 = On: switch “summer/wintertime” and vice versa

Segment 6

1 = On: enable 2 wire smoke sensors (AUX4 - COM)

2 = Reserved

3 = On: zone activity monitor in hours (not in days)

4 = Reserved

5 = Reserved

6 = On : disables Clean Me report

7 = Reserved

8 = On: valid user code will reset tamper memory

Segment 7

1-8 Reserved

LOCATION 38 - SWINGER SHUTDOWN COUNT

Location 38 contains the number of trips on a zone before that zone will be automatically

bypassed. Refer to the feature definitions.

) LOCATION 39 - KEYPAD SOUNDER CONTROL (1 segment, feature selection data)

Segment 1

1 =

On: if keypad sounds for “Telephone Line Cut” when the system is

armed

2 = On: if keypad sounds for “Telephone Line Cut” when disarmed

3 = On: if keypad sounds for an AC power failure

4 = On: if keypad sounds when a low battery is detected

5 = On: if keypad sounds during cross zone trip time

6 = On: if keypad sounds for zone and box tampers

7 = Reserved

8 = Expander trouble

NX-6-EUR Installation manual Page 51 23/12/04

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 103 104

Sem comentários

CADDX NX-6 Manual de Instalação Página 51