CADDX NX-8 Manual do Utilizador descarregar pdf (Página 23)

NX148E-CF

 OPERATING INDIVIDUAL AREAS IN THE MULTI-PARTITION MODE

Enter a code that is a valid arm/disarm code for the area you wish to operate. The

following display will appear on the LCD screen.

Only the areas authorized by this code will

appear.

To toggle between the armed and disarmed states of an individual area, press [r]

[Area number].

To operate an individual area, enter the number of the partition you wish to

operate. The LCD keypad will now operate as a single area keypad. All keys and

functions entered will affect this individual partition only. The lights and display

represent the status of that partition only. The word "System" will be replaced with

the word "Area #". The following is an example of this feature. To exit this screen,

press [#].

Area 5 is selected and Area 5 is ready to

arm. To exit the individual partition mode,

enter [#]-[#].

 SILENCING ALARMS IN THE MULTI-PARTITION MODE

If the keypad is sounding an alarm or the siren is running, it can be silenced by

entering a code with the authority for the area(s) that are in alarm. NOTE: The

[EXIT], [BYPASS], and [STAY] keys will only work if an individual partition is

selected.

12-4—78 Disarm º

--3-56-- Arm º

Area 5 Ready

Type code to arm

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Sem comentários

CADDX NX-8 Manual do Utilizador Página 23